IMPORTANT NOTICE - STORE IS UNDER CONSTRUCTION. DURING THIS TIME TRANSACTIONS WILL NOT BE PROCESSED!!
DECORATIVE SHUTTERS


Island Designs Decorative Shutters provides a finished, decorative look to any residential, commercial or hotel property. Ornamental as well as useful, these shutters make windows look larger and enhance the beauty of your home. They can also provide privacy, some weather protection and security.


DURABILITY & MAINTENANCE

Island Designs Decorative Shutters are made from the highest quality extruded aluminum alloy and stainless steel hardware available and manufactured with the strictest attention to detail, performance and durability.

JHA is committed to providing a wide spectrum of advanced high quality products that keep pace with the fast moving construction industry. Our products provide architects, designers, building contractors, developers and facility managers the competitive edge through effective and attractive solutions in architectural finishes..


ISLAND DESIGNS BAHAMA SHUTTERS




The Bahama Shutter consists of a quality awning type movable panel section connected to the structure at the top by a pivoting non-corrosive aluminum hinge. The hinge allows the Bahama panel section to be adjusted in several positions by adjustable aluminum arms which attach to the panel and to the structure. The best position is 45° which allows clear visibility, however obstructs direct sun light and gives you an attractive shading device.








ISLAND DESIGNS COLONIAL SHUTTERS




The Colonial Shutter provides instant “island appeal” while enhancing the architectural features of your property in addition to providing some weather protection and security.

The Colonial Shutter stacks evenly on each side of your window opening and can be fixed, hinged or sliding depending on your application.






DIFFERENT STYLES



STANDARD POWER COAT COLOUR OPTIONS

White, Black(gloss), Dark Bronze(gloss)
*Custom colors avaliable in wet spray applications.


TECHNICAL SPECIFICATIONS

Bahama Shutter

Shutter:
2” x 1” Aluminum side frame with 2” aluminum shutter blades at 1½” or 2” and 2½" spacings. With 2 No. 2” x 2” top and bottom and 7/8” diameter tubes at the bottom of each end to accept tilt-control arms.

Hardware:
2-piece aluminum top hinge fixed to wall with 1 ¼” x ¼” Tapcon screws at 6” on centres.
Mill finish fixed or adjustable tilt-control arms.
Wall brackets each side to accept tilt-control arms.
2# stainless steel clevis pins (machine screws) to connect tilt-control arms to wall brackets.


Colonial Shutter

Shutter:
2” x 1” Aluminum frame with 2” x 2” top and bottom aluminum shutter blades at 1½” or 2” and 2½" spacings.

Frame:
1¾” equal angle, fixed to wall with 1¼” x ¼” Tapcon screws at 6” on centres.

Hardware:
1¾” equal angle, fixed to wall with 1¼” x ¼” Tapcon screws at 6” on centres.


Winding Gear Colonial Shutter

Shutter:
2” x 1” Aluminum frame with 2” x 2” top and bottom aluminum shutter blades at 1½” or 2” and 2½" spacings.

Top Fixing:
Bearings on 3” square bearing holders, powder coated to match shutter.

Bottom Fixing:
11 to 1 oval gear with pivot and universal crank in 3” x 2” aluminum RHS casing, powder coated to match shutter.

Operator:
Manual crank handle on each side operable from within.


Sliding Colonial Shutter

Shutter:
2” x 1” Aluminum frame with 2” x 2” top and bottom aluminum shutter blades at 1½” or 2” and 2½" spacings and wheel carriers top and bushings at bottom.

Tracks:
Sliding tracks top & bottom with 1” or 2” buildout.

Hardware:
1# metal latch, colour black.


Fixed Colonial Shutter

Shutter:
2” x 1” Aluminum frame with 2” x 2” top and bottom aluminum shutter blades at 1½” or 2” and 2½" spacings with 1” square fixing plates at each corner of the rear face of the shutter. Shutters are fixed through plates to wall using 1¼” x ¼” Tapcon Screws.


SPACING





 

           << BACK TO PRODUCTS